Driver 2.5-inch diaphragm, 1.4-inch exit throat, 90W AES, 180W Program |  |
|
|
|
El ND2530T3 es un driver de compresión de diafragma de 2,5 pulgadas de alta performance, con un cuello de salida de 1.4 pulgadas incorporando tecnologías de última generación. El diafragma y la suspensión están diseñados en titanio puro preciso con un espesor de 0.05mm.
Aplicaciones
Es el driver perfecto para aplicaciones profesionales de alta performance se utiliza desde, sistemas de alta potencia de dos vías hasta sistemas de vías múltiples de tiro largo, medianos y grandes así como también en line arrays. Flexible y fácil uso con divisores de frecuencia, ofrece una alta eficiencia combinado con una muy alta respuesta en frecuencia ofrece la claridad de 1” y la eficiencia y manejo de un driver de compresión de mayor tamaño. Muy buena linealidad se recomienda usar las bocina RCF HF94 y HF64.
|
|
| - |
3-inch Diaphragm, 1.4-inch Exit Throat/ Pure Titanium
Compression Driver |
| - |
180 watt Continuous program power handling |
| - |
Frequency range: 500Hz - 20kHz |
| - |
Direct Drive™ Voice Coil Assembly |
| - |
3-slot, optimized geometry phase plug |
| - |
Aluminum rear cover featuring an advanced vented fin heat dissipation design |
| - |
Copper inductance ring for extended response |
| - |
Vented, damped, low distortion, variable profile
suspension System |
|
|
|
| Driver 2.5-inch diaphragm, 1.4-inch exit throat, 90W AES, 180W Program |
|
Exit Throat Diameter
|
35.5/1.4
|
mm/inch
|
|
Rated Impedance
|
8
|
Ohm
|
|
Power handling capacity: Continuous Program above 1 kHz
|
(above 1.2 kHz) 180
|
Watts
|
|
Power handling capacity: AES above 1 kHz
|
(above 1.0 kHz) 90
|
Watts
|
|
Sensitivity 1W, 1M on-axis on horn
|
110
|
dB
|
|
Frequency Range
|
700-20000
|
Hz
|
|
Diaphragm Material
|
Pure Titanium
|
|
|
Suspension Material
|
Pure Titanium
|
|
|
Suspension Design
|
Progressive
|
|
|
Minimum Impedance
|
7.9 Ohm at 3500 Hz
|
|
|
Voice Coil Diameter
|
63.7/2.5
|
mm/inch
|
|
Voice Coil Material
|
Edgewound Aluminium
|
|
|
Voice Coil Former Design and construction material
|
Direct drive - Nomex
|
|
|
Number of layers
|
1 - Outside
|
|
|
BL Factor
|
10.4
|
T- m
|
|
Flux Density
|
2
|
T
|
|
Phase Plug Design
|
3 slot
|
|
|
Phase Plug Material
|
Aluminium
|
|
|
Magnetics
|
Neodymium
|
|
|
Voice Coil Demodulation
|
Copper ring
|
|
|
Overall Diameter
|
123/4.8
|
mm/inch
|
|
Overall Height
|
69.5/2.7
|
mm/inch
|
|
Mounting 4 each 6mm threaded holes 90 deg. apart on
|
(4 x 6 mm threaded holes at 90 deg.) 101.6/4.0
|
mm/inch
|
|
Net Weight
|
2.1/4.62.3/5.1
|
Kg/Lbs
|
|
Shipping Weight
|
|
Kg/Lbs
|
|
|
| Driver 2.5-inch diaphragm, 1.4-inch exit throat, 90W AES, 180W Program |
|
|
