4PRO 7001-A is powerful and precise in concert sound applications and equally impressive in professional sound systems such as large clubs and theatres . Any element of the system is pushed well below its limit and the final result is a remarkably clean and transparent sound , with the lowest distortion , an increased overall output and an exceptionally smooth frequency response. Specially engineered for touring applications.
4PRO 7001-A is a leading edge system for touring and professional applications . It is an arrayable, active, medium throw system that integrates a massive power 950 Watt amplifier, a complete electronic processor section and “full neodymium” RCF low distortion, high power transducers.
The new 15” inch mid-bass are the result of the latest refinement in years of RCF experience in speaker design and manufacture, resulting in an accurate and a tight bass response. RCF’s unique 10” Precision sealed basket midrange is specially optimised to work with the 4PRO-7001-A 60x40 midrange horn. A massive neodymium magnet and a “Compression Driver level” assembly design has been dedicated to reach low distortion and dynamic properties for this transducer. The compression driver uses a new 2.5” titanium dome in front of a low compression, optimised geometry, aluminum phase plug.
This innovative design is powered from a high flux neodymium magnet and offers a very open and natural sound and an extreme precision in high frequency reproduction. The driver is loaded on a 60x40 constant directivity aluminum horn. A high current 2 step class H design is used to power the low frequencies. Mid and high frequencies are separately powered from class AB dedicated low distortion designs.
The very unique input section presents a combo XLR/Jack line input connector, a recessed master volume and a useful XLR loop-through link. Extra features are the Bass external time delay in/out, the “3-position” array equalisation, the mid-high phase switch. The processor section includes active crossover, system equalization, transducer phase alignment, limiter and protection functions. The system is visually monitored from 4 status LEDs.
4PRO-7001 MH is the two way mid-high system in a trapezoidal enclosure for easy array applications 4PRO-7001 is the active mid-bass section, including 2 x 15” high power neodymium mid-bass and the powered electronic. The two 15” are loaded in pass-band high efficiency configuration.
All components are housed in a strong Baltic birch plywood enclosures. The woofers and mid-high horns are protected from full front, strong, powder coated, metal grilles.The cabinets features M10 threaded fly points and 8 each 3-position fly-tracks. Two side handles for easy portability for the MH and 4 side handles for the BA. |
|
| - |
950 watt Monolithic tri-amplification. 600 watt low frequency, 300 watt midrange frequency and 50 watt high frequency power. |
| - |
138 dB max SPL. |
| - |
Controlled dispersion, 60 x 40 low distortion, mid-high horns. |
| - |
2 x 15” neodymium high power mid-bass, 75mm inside/outside aluminium coil. |
| - |
10” neodymium high efficiency, low distortion, sealed basket, horn loaded midrange. |
| - |
2” neodymium, titanium dome, high frequency driver, aluminum horn. |
| - |
Electronic equalization, phase alignment, limiter and protection. |
| - |
Line combo XLR/Jack input, XLR signal output. |
| - |
Bass delay insert, Mid-high phase switch, Array equalisations. |
| - |
Baltic birch cabinets with aluminum handles for easy transportation and positioning. |
| - |
M10 fly points, 8 fly-tracks each cabinet. |
|
|
|
